Welcome to the Calypso Mastery Course! You have lifetime access to these videos.
Contact me at steven@learncmm with any questions.
Steven DeVowe
Instructor
Basic Program 1
Lesson 1 of 4 within section Basic Program 1.
You must enroll in this course to access course content.
Lesson 2 – Base Alignment
Lesson 2 of 4 within section Basic Program 1.
You must enroll in this course to access course content.
Lesson 3 – Add Circles & Dimensions
Lesson 3 of 4 within section Basic Program 1.
You must enroll in this course to access course content.
Lesson 4 – Run the Program!
Lesson 4 of 4 within section Basic Program 1.
You must enroll in this course to access course content.
Basic Program 2
Lesson 1 – Toolbar & CAD Model
Lesson 1 of 6 within section Basic Program 2.
You must enroll in this course to access course content.
Lesson 2 – Base Alignment & Clearance Cube
Lesson 2 of 6 within section Basic Program 2.
You must enroll in this course to access course content.
Lesson 3 – Distances & Radii
Lesson 3 of 6 within section Basic Program 2.
You must enroll in this course to access course content.
Lesson 4 – Parallelism & Bulk Settings
Lesson 4 of 6 within section Basic Program 2.
You must enroll in this course to access course content.
Lesson 5 – Understanding the Run Window
Lesson 5 of 6 within section Basic Program 2.
You must enroll in this course to access course content.
Lesson 6 – Basic Reporting & Color Maps
Lesson 6 of 6 within section Basic Program 2.
You must enroll in this course to access course content.
Intermediate Program 1
Lesson 1 – Setup & Distance to Plane
Lesson 1 of 3 within section Intermediate Program 1.
You must enroll in this course to access course content.
Lesson 2 – Short Radius, Angle & Intersect Point
Lesson 2 of 3 within section Intermediate Program 1.
You must enroll in this course to access course content.
Lesson 3 – Cone Intersection and Slot
Lesson 3 of 3 within section Intermediate Program 1.
You must enroll in this course to access course content.
Intermediate Program 2
Lesson 1 – Base Align, Symmetry Line, Secondary Alignment
Lesson 1 of 3 within section Intermediate Program 2.
You must enroll in this course to access course content.
Lesson 2 – Composite Position, Best-fit Bore Pattern, Different Probe Angle
Lesson 2 of 3 within section Intermediate Program 2.
You must enroll in this course to access course content.
Lesson 3 – Plots and Color Maps for Position and Roundness
Lesson 3 of 3 within section Intermediate Program 2.
You must enroll in this course to access course content.
