Welcome to the Calypso Mastery Course! You have lifetime access to these videos.
Click here to download the CAD model, part drawing and other files that go with the lessons.
Contact me at steven@learncmm.com with any questions.
Steven DeVowe
Instructor
Basic Program 1
Lesson 1 of 4 within section Basic Program 1.
You must enroll in this course to access course content.
Lesson 2 – Base Alignment
Lesson 2 of 4 within section Basic Program 1.
You must enroll in this course to access course content.
Lesson 3 – Add Circles & Dimensions
Lesson 3 of 4 within section Basic Program 1.
You must enroll in this course to access course content.
Lesson 4 – Run the Program!
Lesson 4 of 4 within section Basic Program 1.
You must enroll in this course to access course content.
Basic Program 2
Lesson 1 – Toolbar & CAD Model
Lesson 1 of 6 within section Basic Program 2.
You must enroll in this course to access course content.
Lesson 2 – Base Alignment & Clearance Cube
Lesson 2 of 6 within section Basic Program 2.
You must enroll in this course to access course content.
Lesson 3 – Distances & Radii
Lesson 3 of 6 within section Basic Program 2.
You must enroll in this course to access course content.
Lesson 4 – Parallelism & Bulk Settings
Lesson 4 of 6 within section Basic Program 2.
You must enroll in this course to access course content.
Lesson 5 – Understanding the Run Window
Lesson 5 of 6 within section Basic Program 2.
You must enroll in this course to access course content.
Lesson 6 – Basic Reporting & Color Maps
Lesson 6 of 6 within section Basic Program 2.
You must enroll in this course to access course content.
Intermediate Program 1
Lesson 1 – Setup & Distance to Plane
Lesson 1 of 3 within section Intermediate Program 1.
You must enroll in this course to access course content.
Lesson 2 – Short Radius, Angle & Intersect Point
Lesson 2 of 3 within section Intermediate Program 1.
You must enroll in this course to access course content.
Lesson 3 – Cone Intersection and Slot
Lesson 3 of 3 within section Intermediate Program 1.
You must enroll in this course to access course content.
Intermediate Program 2
Lesson 1 – Base Align, Symmetry Line, Secondary Alignment
Lesson 1 of 3 within section Intermediate Program 2.
You must enroll in this course to access course content.
Lesson 2 – Composite Position, Best-fit Bore Pattern, Different Probe Angle
Lesson 2 of 3 within section Intermediate Program 2.
You must enroll in this course to access course content.
Lesson 3 – Plots and Color Maps for Position and Roundness
Lesson 3 of 3 within section Intermediate Program 2.
You must enroll in this course to access course content.
Advanced Program 1
Lesson 1 – Profile with Single Points
Lesson 1 of 3 within section Advanced Program 1.
You must enroll in this course to access course content.
Lesson 2 – Profile with Curves
Lesson 2 of 3 within section Advanced Program 1.
You must enroll in this course to access course content.
Lesson 3 – Hole Evaluation & Best-fit Datum
Lesson 3 of 3 within section Advanced Program 1.
You must enroll in this course to access course content.
Advanced Program 2
Lesson 1 of 6 within section Advanced Program 2.
You must enroll in this course to access course content.
Lesson 2 of 6 within section Advanced Program 2.
You must enroll in this course to access course content.
Lesson 3 of 6 within section Advanced Program 2.
You must enroll in this course to access course content.
Lesson 4 of 6 within section Advanced Program 2.
You must enroll in this course to access course content.
Lesson 5 of 6 within section Advanced Program 2.
You must enroll in this course to access course content.
Lesson 6 of 6 within section Advanced Program 2.
You must enroll in this course to access course content.
